Hollow shaft encoder
Using directly connected to the motor end plate spring, suitable for servo motor Outside diameter Ф 58 X 35, shaft hole Ф 9 X 15 taper (1:10), cable side out Has the test U V W signal of AC motor pole position
Download
                            ●Product Feature 
※ Using directly connected to the motor end plate spring, suitable for servo motor
※ Outside diameter Ф 58 X 35, shaft hole Ф 9 X 15 taper (1:10), cable side out
※ Has the test U V W signal of AC motor pole position
 
	
		
※ Standard number of ≤2500p/r Or according to user requirements 
※Models, for example: the basic model ICU5809,Cable side out G,The output pulse number 2500 p/r,Tz =1/2T,Power Voltage DC5V,number of pole pairs 4P,NDRV L.denoted as ICU5809-101G2500BZ2-4P5L
●Wiring table (the actual wiring the encoder sign shall prevail)
 
	
		
※ Signal as shown in the table wire color connection, shielded wire has connected encoder housing
※ Standard output cable length is 1 m, up to 50 m
●echnical parameters
 
	
		
●mounting dimensions(Units:mm)

                            
                        
                        
                    ※ Using directly connected to the motor end plate spring, suitable for servo motor
※ Outside diameter Ф 58 X 35, shaft hole Ф 9 X 15 taper (1:10), cable side out
※ Has the test U V W signal of AC motor pole position
| ※ Model Coding: | ICU5809 | - | 101 | G | 2500 | B Z 2 | - | 5 | L | ||||
|  |  |  |  |  |  |  |  |  |  |  |  |  | |
| Model | Model extension | Air plug, cable | The output pulse number | Z signal identification | Power voltage | Output Mode | 
※Models, for example: the basic model ICU5809,Cable side out G,The output pulse number 2500 p/r,Tz =1/2T,Power Voltage DC5V,number of pole pairs 4P,NDRV L.denoted as ICU5809-101G2500BZ2-4P5L
●Wiring table (the actual wiring the encoder sign shall prevail)
| 
					Signals 
				 | 
					+5V 
				 | 
					OV 
				 | 
					A 
				 | 
					A 
				 | 
					B 
				 | B | 
					Z 
				 | Z | 
					U 
				 | U | V | V | 
					W 
				 | 
					W 
				 | 
| 
					stitching color 
				 | 
					Red 
				 | 
					Black 
				 | 
					Green 
				 | 
					Black/Green 
				 | 
					White 
				 | Black-and-white | 
					Yellow 
				 | Black/Yellow | 
					Brown 
				 | Black/Brown | ash | Black/ash | 
					Orange 
				 | 
					Black/Orange 
				 | 
※ Standard output cable length is 1 m, up to 50 m
●echnical parameters
| Output wave | square wave | Operating Temperature | -30°C~100°C | 
| Current consumption | ≤160mA | Storage Temperature | -25°C~80°C | 
| response frequency | 0~120KHz | cResponse Frequency | 30~85% non condensing | 
| Empty load ratio | 0.5T+/-0.1T | Power voltage | DC+5+/-5% or +5~12V、+12~24V | 
| Maximum revolution | 6000rmp | Surge suppression | 980m/s2,6ms,XYZ Direction of the two | 
| moment of inertia | 4.0 x 10-6Kgm2 | Shock resistant | 50m/s2,10~200Hz,XYZ Direction of the 2 h | 
| Starting torque | 2.5 x 10-3Nm(+25°C) | Operating life | MTBF≥40000h(+25°C,2000rpm) | 
| Maximum axial load | radial direction 20N;axial direction 10N | Output Voltage | high level Vh≥85%Vcc,low level Vi≤0.3V | 
| Protection | Waterproof and dustproof oil IP54 | Quality | 0.2kg | 


 
        




